[multiprofile] Convert mpc85xx architecture to multiprofile
[multiprofile] Fix some Ubiquiti targets with IMAGE instead of FACTORY
Improve customization of firmware images in Makefile
Add kernel scheduling modules, luci-app-sqmp and tc to the list of packages to compile as modules
Add the CONFIG_PACKAGE_luci-app-qos=m option to x86-geode multi-profile target
Avoid the ppp package and modules to be installed on those arch-subarchs with qmp-tiny-node devices
[multiprofile] Remove unneeded target files
Add the CONFIG_PACKAGE_luci-app-qos=m option to make sure the package and its dependencies (basically, the kernel modules) are generated during the compilation, to later install them without troubles
[Multiprofile] Migrate Alix/x86-geode to multiprofile
Alix's firmware binary has .img extension, not .bin
[multiprofile] Adapt Makefile to multiprofile (IX): fix copying single target profiles. Fix recovering saved custom kernelconfigs.
[multiprofile] Dirty fix for building a single target (except for non-subarch targets)
Sort mt7620 targets
Add support for ZBT APE522II devices
[multiprofile] Remove unused %arch-%subarch-imagebuilder profiles
[multiprofile] Add missing WT-1520 devices in targets.mk
[multiprofile] Adapt Makefile to multiprofile (VIII): compile multi-profile targets only once and just copy the binaries on single targets
[multiprofile] Adapt Makefile to multiprofile (VII): fix compilation of non-multiprofile target
[multiprofile] Adapt Makefile to multiprofile (VI): fix images path
Rename Rocket M target name
[multiprofile] Adapt Makefile to multiprofile (V): fix images path
[multiprofile] Adapt Makefile to multiprofile (IV)
[multiprofile] Adapt Makefile to multiprofile (III)
Add support for Wavlink WL-WN575A3 devices
[multiprofile] Add ramips mt7628 multiprofile imagebuilder
[multiprofile] Adapt Makefile to multiprofile (II)
[multiprofile] Adapt Makefile to multiprofile
[multiprofile] Convert ar71xx-generic and ramips-mt7620 to multiprofile and start Makefile adaption
Update Nexx WTxy20-zM targets
Fix VoCore targets
Add missing subarchitecture to vmware target
Add missing folder in path for TL-WDR3500-v1
Add missing $(SUBARCH)/ to TL-WR841-v10's filenames
Sync filenames for TP-Link TL-WR841* targets
Merge branch 'LEDE' of ssh://dev.qmp.cat/qmpfw into LEDE
Sync filenames for some targets, which have changed slightly
Temporary fix for #389, only rt305x-legacy devices
Temporary fix for #389, only ar71xx-legacy devices
Remove old ar71xx target which acted as a sort of imagebuilder
Add brcm2708-bcm2708-ib, brcm2708-bcm2709-ib and brcm2708-bcm2710-ib targets to the target list
Add x86 64 (x86_64) subarchitecture and imagebuilder
Add ramips mt7621 subarchitecture and imagebuilder
Update architecture imagebuilder config files to the new LEDE multiple-profile, per-device profile build
Add brcm2708 architecture, and bcm2708, bcm2709 and bcm2710 sub-architectures
Add support for TL-WDR3500-v1 and TL-WA7510N devices
Replace forgotten openwrt TBUILD in targets.mk
Fix missing targets LEDE subdirectory in recently added devices
Fix Sunxi generic imagebuilder target
Merge branch 'kalimotxo' into LEDE
Rename Xiaomi MiWiFi Mini target and file name according to OpenWrt's changes
Merge branch 'testing' into kalimotxo
Fix imagebuilders output file names
Fix image name for a few devices from testing merge
Add sunxi architecture imagebuilder
Do not gzip Lamobo R1 SD card image
Base qMp firmware builder on LEDE. Also fix a few targets and configs that got outdated.
Change compiled binary firmware images filename. The prefix is no longer openwrt, but qmp.
This is a quick fix, the prefix should be obtained from the compilation variables (VERSION_DIST?).
Add sysupgrade support for TP-Link TL-WR841N-v10 devices
Add support for TP-Link TL-WR841N-v10 devices
Add support for Alfa Network N5 devices
Add support for Lamobo R1 (BananaPi R1) boards
Remove -ib (architecture imagebuilder) profiles from nightlycompile.
Rename testing images as testing after 3.2 release
Merge branch 'master' into testing
Add files folder to .gitignore
Offload packages download to OpenWrt's official repository
Add support for Microduino MicroWRT:
- Add device to targets.mk, to generate firmware images - Add checksum to images/DEVICES, to enable sysupgrade
Add CONFIG_LUCI_SRCDIET=y option to kstripped images to save more space
Add ar71xx_kstrip target for 4 MB flash devices
Fix #369. Use mt7620_kstrip-qmp-tiny-node profile for Nexx WT3020-4M devices
Add a profile for MT7620 devices with 4M flash with the unnecessary exports from the kernel image stripped
qMp 3.2 Clearance release candidate 3
Change VERSION_* variables in Makefile to name binary images accordingly
Merge branch 'testing' into kalimotxo (keep kalimotxo settings)
Conflicts: Makefile images/DEVICES targets.mk
Remove tl-mr3040-cam target from targets.mk
qMp 3.2 Clearance release candidate 2
Fix #373. Use a hyphen instead of an underscore in the timestamp between date and time
Fix #373. Use $(COMMUNITY)_$(VERSION_NUMBER)-$(VERSION_NICK)_$(NAME)_factory/syupgrade_$(TIMESTAMP).bin for precompiled images' filenames
Update DEVICES hashes list with the new naming scheme and sort them alphabetically
Fix #373 (1/2). Enforce precompiled images' filename format to $MANUFACTURER_$MODEL-NAME
Remove unused tl-mr3040 "targets"
Fix #373 (1/2). Use coherent naming for precompiled images' filenames
Use ar71xx_kstrip-qmp-tiny-node profile for TP-Link TL-WR841N[D]-v{7,8,9} devices
Add a profile for ar71xx devices devices with 4M flash with the unnecessary exports from the kernel image stripped
Use QinQ qMp packages branch (802.1ad VLANs) for Kalimotxo images
Remove unused mt7620a-qmp-small-node and mt7620q-qmp-small-node profiles, they are already merged into mt7620-qmp-small-node
Use OpenWrt Chaos Calmer 15.05 git repository
Add VoCore back to targets.mk and to sysupgrade