qMp (Quick Mesh Project) and BMX6/BMX7 development site: Assumpteshttps://dev.qmp.cat/https://dev.qmp.cat/favicon.ico?16699090422021-10-29T13:01:58ZqMp (Quick Mesh Project) and BMX6/BMX7 development site
Redmine qMp (Quick Mesh Project) - Packages - Error #498 (Nou): Reconfiguration of ath10k adhoc/80211s ra...https://dev.qmp.cat/issues/4982021-10-29T13:01:58ZRoger Pueyo Centellesqmp@rogerpueyo.com
<p>mANTBox15s with qMp 5.1.0 80211s variant works with 802.11s but not with AdHoc. When configuring the radio in AdHoc mode, the wlan0 doesn't come up. Afterwards, reconfiguring it in 802.11s mode makes the device not to respond anymore: eth0 ends out of the br-lan and weird radioNN interfaces are detected. UART connection would be helpful.</p> qMp (Quick Mesh Project) - Packages - Error #496 (Nou): Static routes are deleted on qmpcontrol c...https://dev.qmp.cat/issues/4962021-10-04T20:11:27ZRoger Pueyo Centellesqmp@rogerpueyo.comqMp firmware cooker - Característica #494 (Nou): Remove support for devices with 32 MB RAMhttps://dev.qmp.cat/issues/4942021-10-01T14:21:54ZRoger Pueyo Centellesqmp@rogerpueyo.com
<p>They can't pass the qmp_autoconf process successfully due to low RAM.</p> qMp (Quick Mesh Project) - Packages - Error #493 (Tancat): Wired devices with MESH role only are ...https://dev.qmp.cat/issues/4932021-09-23T12:54:42ZRoger Pueyo Centellesqmp@rogerpueyo.com
<p>These devices don't have rescue IP nor VLAN 12 on top and, therefore, they are not brought up by the network daemon. As a consequence, BMX6 can't actually use them for meshing.</p>
<p>Putting them in a virtual interface does bring them up:</p>
<pre>
config interface 'mesh_e2'
option device 'eth2'
option auto '1'
</pre> qMp (Quick Mesh Project) - Packages - Error #492 (Tancat): qmp_log locks qmpcontrol configure_net...https://dev.qmp.cat/issues/4922021-09-20T13:25:58ZRoger Pueyo Centellesqmp@rogerpueyo.com
<p>E.g.: when no wireless interfaces.</p> qMp firmware cooker - Error #491 (Tancat): Many 8/64 devices use the qmptiny flavour while they c...https://dev.qmp.cat/issues/4912021-09-19T18:25:03ZRoger Pueyo Centellesqmp@rogerpueyo.com
<p>Via Llorenç</p> qMp (Quick Mesh Project) - Packages - Error #490 (Tancat): /usr/bin/qmpcontrol: line 197: ubus_ne...https://dev.qmp.cat/issues/4902021-09-19T17:24:19ZRoger Pueyo Centellesqmp@rogerpueyo.com
<p>qMp configuration scripts complain about "ubus_network_wireless" not being found</p> qMp (Quick Mesh Project) - Packages - Error #489 (Tancat): Duplicate bridge br-lan in routers wit...https://dev.qmp.cat/issues/4892021-09-18T18:28:23ZRoger Pueyo Centellesqmp@rogerpueyo.com
<p>E.g.: Phicomm K2P/KE2P:</p>
<pre>
config device
option name 'br-lan'
option type 'bridge'
list ports 'lan1'
list ports 'lan2'
list ports 'lan3'
list ports 'lan4'
config interface 'lan'
option type 'bridge'
option auto '1'
option proto 'static'
option ipaddr '172.30.22.1'
option netmask '255.255.0.0'
option dns '208.67.222.222 77.109.148.136 109.69.8.34'
option ip6addr 'fd00:1714:1714:93ad::1/64'
</pre> qMp (Quick Mesh Project) - Packages - Error #477 (Nou): Cannot configure qmp-wireless in Nanostat...https://dev.qmp.cat/issues/4772020-02-26T15:27:51Z
<p>Hi,</p>
<p>Menu and pages for configuring wireless options on qMp tab on qMp firmware on versions 4.2.1 and higher (confirmed also 4.2.2) are missing on Ubiquiti Nanostation XW post 1846G HW revision.</p>
<p>They can be changed via cli editing /etc/config/qmp and changes are applied after a reboot. Is there a quicker way?</p>
<p>Regards<br />Alex<br />guifi.net Madrid</p> qMp (Quick Mesh Project) - Packages - Suport #476 (Nou): Mixed 'mesh + legacy' mode only works as...https://dev.qmp.cat/issues/4762020-02-26T15:24:13Z
<p>Hi</p>
<p>We have noticed that in the following combinations:<br />1) Ubiquiti Nanostation XW old (pre 1847G) and new (post 1846G) with qMp 4.2.1, 4.2.2 or Kalimotxo<br />2) Comfast Cf-E120A-V3 with qMp Experimental aka Kalimotxo<br />3) TP-Link CPE 510-V3 with qMp Experimental aka Kalimotxo</p>
<p>Any of those devices-versions are not working in 'mesh + legacy' mode.<br />When 'mesh + legacy' is selected they are working as mere 'mesh' mode.</p>
<p>This is happening with those four models in any version higher that 4.2.<br />qMp 4.2 works fine.</p>
<p>The tests have been conducted with a 3.2.1 Ubiquiti Nanostastation (pre 1847G).<br />This last device works well with any device running qMp 4.2 or lower.</p>
<p>Regards<br />Alex<br />guifi.net Madrid</p> qMp (Quick Mesh Project) - Packages - Error #450 (En progrés): [qmp-ncgui] nodes[indexNode(nodeId...https://dev.qmp.cat/issues/4502018-07-10T11:53:19ZRoger Pueyo Centellesqmp@rogerpueyo.com
<p><a class="external" href="http://dev.qmp.cat/projects/qmp/repository/revisions/master/annotate/packages/qmp-ncgui/files/www/luci-static/resources/nc/js/ncui-sidebar-content.js#L52">http://dev.qmp.cat/projects/qmp/repository/revisions/master/annotate/packages/qmp-ncgui/files/www/luci-static/resources/nc/js/ncui-sidebar-content.js#L52</a></p> qMp (Quick Mesh Project) - Packages - Error #449 (Nou): Port forwarding not workinghttps://dev.qmp.cat/issues/4492018-04-27T19:40:35Zgabriel lucas
<p>Hi,</p>
<p>I´m trying to port forward (Firewall -> Port Forwarding) in qmp but it seems not to be working.<br />I fixed it in the past via xinetd [1], but since I am hitting an issue installing packages in Macondo 4.0, I can´t make it work.</p>
<p>Does the port forward in qmp firewall (web interface) work?</p>
<p>I paste the relevant section of my /etc/config/firewall</p>
<p>config redirect<br /> option target 'DNAT'<br /> option src 'wan'<br /> option dest 'lan'<br /> option proto 'tcp udp'<br /> option src_dport '8080'<br /> option dest_ip '10.38.32.34'<br /> option dest_port '80'<br /> option name 'test'</p>
<p>[1] Related thread. <a class="external" href="https://mail.dabax.net/pipermail/qmp-users/2016-May/000914.html">https://mail.dabax.net/pipermail/qmp-users/2016-May/000914.html</a></p>
<p>The antenna is a nanobridge M5 with qMp 4.0 Macondo (branch 4.0 rev.029002d-20180102-2014)<br />LEDE Reboot 17.01.4 r3560-79f57e422d / LuCI lede-17.01 branch (git-17.336.23170-d2dc32a)</p> qMp (Quick Mesh Project) - Packages - Suport #447 (Nou): webgui on nodes never finishes loading w...https://dev.qmp.cat/issues/4472018-02-05T17:59:42Zleonardo taborda
<p>wdr-3500<br />ip: 10.1.0.1<br />LEDE Reboot 17.01.4 r3560-79f57e422d</p>
<p>wdr-3600<br />ip: 10.1.1.1<br />LEDE Reboot 17.01.4 r3560-79f57e422d</p>
<p>Both devices are doing wired mesh, on the wan port., mesh over wifi disabled.</p>
<p>If you try to access the 10.1.1.1 webui by using any client connected on 10.1.0.1, and with any browser, the webui never finishes loading at all. The same behavior happens on the opposite direction. Trying to reach the 10.1.0.1 webui from a client on 10.1.1.1, the intended webui never loades at all</p>
<p>The same behavior happens between wdr3600 routers. This has been observed on a real deployment that prevents linking two separated mesh clouds using mikrotik devices plugged to wan ports, acting as a long dumb cable.<br />This qMp iteration sometimes feels that loads the webui slower than previous qmp versions on the wdr3600</p>
<p>Things that work in this small setup: <br />-ssh to the desired router over the mesh<br />-ping to nodes<br />-ping to clients in any node from any node</p>
<p>a video depicting the issue is attached: <a class="external" href="https://youtu.be/9hhqLH374vA">https://youtu.be/9hhqLH374vA</a></p> qMp (Quick Mesh Project) - Packages - Error #446 (En progrés): [qmp-users] BMX6 Graph issue in Ma...https://dev.qmp.cat/issues/4462018-02-05T13:31:51ZRoger Pueyo Centellesqmp@rogerpueyo.com
<p>Visual graph provided by luci-app-bmx6 does not work In Macondo release.</p>
<p>Problem can be fixed by package from RC1, for example <a class="external" href="https://fw.qmp.cat/Releases/4.0-rc1/packages/mips_24kc/routing/luci-app-bmx6_3_mips_24kc.ipk">https://fw.qmp.cat/Releases/4.0-rc1/packages/mips_24kc/routing/luci-app-bmx6_3_mips_24kc.ipk</a></p>
<p>qmp-system package also must be reinstall <a class="external" href="https://fw.qmp.cat/Releases/4.0/packages/mips_24kc/qmp/qmp-system_4.0-r20180102_1551-Macondo-029002d_mips_24kc.ipk">https://fw.qmp.cat/Releases/4.0/packages/mips_24kc/qmp/qmp-system_4.0-r20180102_1551-Macondo-029002d_mips_24kc.ipk</a></p>
<p>Also you need to edit /etc/banner</p> qMp (Quick Mesh Project) - Packages - Error #445 (Nou): prior current settings altered when perfo...https://dev.qmp.cat/issues/4452018-01-29T14:16:39Zleonardo taborda
<p>On WDR3600 routers, using latest qmp available at the date (27-01-2018) from fw.qmp.cat the following behavior is detected:</p>
<p>-when disabling wlan1 interface, the device ip address gets unexpectedly changed from the one set by the community team to 10.30.131.1<br />-when changing netmask, i.e from /24 to /27, the router ip address changes from the value set by the community team to 10.30.203.1. Also the ap ssid changes from a personalized one to qmp-ap.</p>