https://dev.qmp.cat/https://dev.qmp.cat/favicon.ico?16699090422018-09-16T17:13:28ZqMp (Quick Mesh Project) and BMX6/BMX7 development siteqMp (Quick Mesh Project) - Packages - Error #460: qMp autoconfiguration script does not autoconfigure the wireless interfaceshttps://dev.qmp.cat/issues/460?journal_id=10172018-09-16T17:13:28ZRoger Pueyo Centellesqmp@rogerpueyo.com
<ul></ul><pre>
root@qMp-85d4:~# cat qmp_autoconf.log
Starting qmp configuration...
Waiting 10 seconds to be sure all is configured
[Preparing wifi]
Using countrycode US
WiFi devices:
--------------------------------------------------
wlan0 ESSID: "OpenWrt" Access Point: DC:9F:DB:8E:85:D4 Mode: Master Channel: 36 (5.180 GHz) Tx-Power: 27 dBm Link Quality: unknown/70 Signal: unknown Noise: -91 dBm Bit Rate: unknown Encryption: none Type: nl80211 HW Mode(s): 802.11an Hardware: 168C:002A 0777:E805 [Ubiquiti Bullet M5] TX power offset: 5 dB Frequency offset: none Supports VAPs: yes PHY name: phy0
--------------------------------------------------
[Configuring initial system]
Backuping wireless config file to: /etc/config/wireless.qmp_backup
Done: all WiFi devices configured
---------------------------------------
Starting smart networking configuration
---------------------------------------
Network devices found:
- LAN eth0
- MESH eth0 eth1
- WAN eth1
[Configuring full system]
Command failed: Not found
qMp: Configuring /etc/hosts file with qmpadmin entry
uci: Entry not found
Cannot get IP or HostName
plugin
qMp: Disabling service b6m-spread
stopped process in pidfile '/var/run/b6m-spread.pid' (pid 2720)
qMp: Enabling service gwck
qMp: Enabling service mdns
-> preparing bmx6
INFO uci_create_section: bmx6.cfg0e5cb5=syncSms
INFO uci_save_option: bmx6.cfg0e5cb5.syncSms=mdns
INFO uci_save_option: bmx6.cfg0e5cb5.syncSms=mdns
INFO : --syncSms mdns
-> adding addn-host entry to dnsmasq config file
-> restarting dnsmasq daemon
Command failed: Not found
udhcpc: started, v1.28.3
udhcpc: sending discover
udhcpc: no lease, failing
-> cleaning files
-> publishing own IPv4 domains: qMp-85d4.qmp
-> publishing own IPv6 domains: qMp-85d4.qm6
-> publishing own external domains:
-> not published domains found in the network
qMp: Enabling service netserver
qMp: Disabling service netserver
Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_INET6
qMp: Enabling service munin
Munin already running
-----------------------
Configuring networking
-----------------------
qMp: Removing current network configuration
Configuring eth1 in WAN mode
Attaching device eth1 to interface wan_e1
-> eth1 attached to wan_e1
qMp: Adding TCP ClampMSS rule for eth1
qMp: Adding TCP ClampMSS rule for eth1
Setting up DHCP server in LAN interface
Configuring LAN bridge
Attaching device eth0 to interface lan
-> eth0 attached to lan bridge
Configuring eth0 for Meshing
device eth0 is in viface lan
Setting VLAN 12 for interface eth0
VLAN 12 for interface eth0 is of type 802.1ad (QinQ)
qmp_get_ip6_slow addr_prefix=fd02:0:0::/128 addr=fd02:0:0:: mask=128
qmp_get_ip6_slow addr_prefix=2002::112/128 addr=2002::112 mask=128
Configuring FD02:0:0:DC9F:DB8F:85D4:0:112/128 for bmx6
Configuring eth1 for Meshing
device eth1 is in viface wan_e1
Setting VLAN 12 for interface eth1
VLAN 12 for interface eth1 is of type 802.1ad (QinQ)
qmp_get_ip6_slow addr_prefix=fd02:0:0::/128 addr=fd02:0:0:: mask=128
qmp_get_ip6_slow addr_prefix=2002::212/128 addr=2002::212 mask=128
Configuring FD02:0:0:DC9F:DB8F:85D4:0:212/128 for bmx6
Configuring interface eth0 in BMX6
Configuring interface eth1 in BMX6
qMp: Configuring gateway inet6_offer of type offer
qMp: Configuring gateway inet4_offer of type offer
qMp: Configuring gateway cloud of type search
qMp: Configuring gateway cloud6 of type search
qMp: Configuring gateway community of type search
uci: Invalid argument
qMp: Configuring gateway community6 of type search
uci: Invalid argument
qMp: Starting ULA LAN configuration
Configuring fd00:1714:1714:85d4::1/64 as LAN ULA address
Publishing fd00:1714:1714:85d4::/64 over the mesh network
INFO : --dev -
INFO : --unicastHna fd00:1714:1714:85d4::/64
INFO : --tunIn -
INFO : --tunIn -
INFO : --tunOut inet6
INFO : --tunOut inet6 /network ::/0
INFO : --tunOut -
INFO : --tunOut -
Done
Rebooting
qMp: Configuring /etc/hosts file with qmpadmin entry
qMp: Enabling service netserver
qMp: Disabling service netserver
Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_INET6
</pre> qMp (Quick Mesh Project) - Packages - Error #460: qMp autoconfiguration script does not autoconfigure the wireless interfaceshttps://dev.qmp.cat/issues/460?journal_id=10182018-09-17T08:54:41ZRoger Pueyo Centellesqmp@rogerpueyo.com
<ul><li><strong>% realitzat</strong> ha canviat de <i>0</i> a <i>10</i></li><li><strong>Prioritat</strong> ha canviat de <i>Urgent</i> a <i>Alta</i></li><li><strong>Estat</strong> ha canviat de <i>Nou</i> a <i>En progrés</i></li></ul><p>Tested on the same device with a newly compiled image; wireless interface came up successfully.</p> qMp (Quick Mesh Project) - Packages - Error #460: qMp autoconfiguration script does not autoconfigure the wireless interfaceshttps://dev.qmp.cat/issues/460?journal_id=10192018-09-17T08:55:26ZRoger Pueyo Centellesqmp@rogerpueyo.com
<ul><li><strong>% realitzat</strong> ha canviat de <i>10</i> a <i>20</i></li></ul><p>Tested on a PC Engines APU, radio turns on as expected.</p> qMp (Quick Mesh Project) - Packages - Error #460: qMp autoconfiguration script does not autoconfigure the wireless interfaceshttps://dev.qmp.cat/issues/460?journal_id=10372018-10-03T11:45:06ZRoger Pueyo Centellesqmp@rogerpueyo.com
<ul><li><strong>Estat</strong> ha canviat de <i>En progrés</i> a <i>Resolt</i></li><li><strong>% realitzat</strong> ha canviat de <i>20</i> a <i>100</i></li></ul><p>Tested a few devices, no problems found.</p> qMp (Quick Mesh Project) - Packages - Error #460: qMp autoconfiguration script does not autoconfigure the wireless interfaceshttps://dev.qmp.cat/issues/460?journal_id=10382018-10-03T11:45:12ZRoger Pueyo Centellesqmp@rogerpueyo.com
<ul><li><strong>Estat</strong> ha canviat de <i>Resolt</i> a <i>Tancat</i></li></ul>