Config » Historial » Revisió 11
Revisió 10 (Pau Escrich, 09-01-2013 17:44) → Revisió 11/13 (Pau Escrich, 11-01-2013 13:20)
h1. Config
The file /etc/config/qmp is the central configuration file (based on UCI).
h3. Network interfaces
<pre>
config 'qmp' 'interfaces'
# option 'configure_switch' 'eth0' # (uncomment line if available, e.g. WGT634U)
option 'lan_devices' 'eth0 wlan1 dummy0' # LAN (dhcp server)
option 'wan_devices' 'eth1' # WAN (dhcp client)
option 'mesh_devices' 'wlan0 wlan2 eth0 eth1' # Mesh devices, will be extended by VLAN tag!
option 'no_vlan_devices' '' # Network devices where we do not want to use VLAN tag (not recommended!)
</pre>
h3. Node information
<pre>
config 'qmp' 'node'
option 'primary_device' 'eth0'
option 'community_id' 'qMp'
option 'community_node_id' ''
option 'key' '/tmp/qmp_key'
</pre>
h3. Upgrade firmware
<pre>
config 'qmp' 'update'
option 'url' 'http://fw.qmp.cat/testing'
option 'images' 'IMAGES'
option 'devices' 'DEVICES'
option 'filter' 'sysupgrade'
option 'preserve' '/etc/config/qmp /etc/shadow /etc/passwd /etc/rc.local /etc/firewall.user /etc/dropbear/* /etc/config/b6m-spread'
</pre>
h3. DHCP overlapping (Roaming)
This is for Roaming mode, each node assings a non-overlapping DHCP IPv4 ranges over a /16 network on LAN device
<pre>
config 'qmp' 'non_overlapping'
option 'ignore' '0'
option 'dhcp_offset' '2'
option 'qmp_leasetime' '1h'
</pre>
h3. Network (layer3)
<pre>
config 'qmp' 'networks'
option 'dns' '141.1.1.1 85.126.4.170 202.83.95.227'
option 'lan_address' '172.30.22.1'
option 'lan_netmask' '255.255.255.0'
# means olsr6 use vlantag 10+1, bmx6 use vlantag 10+2
option 'mesh_protocol_vids' 'olsr6:1 bmx6:2'
option 'mesh_vid_offset' '10'
# rescue network prefix, the 16 missing bits are taken from device MAC
option 'rescue_prefix24' '169.254'
# OLSR (backup protocol) only supports IPv6
option 'olsr6_mesh_prefix48' 'fd01:0:0'
option 'olsr6_ripe_prefix48' '2011:0:0'
# BMX6 (main protocol) runs IPv6 backbone and IPv4 tunneled
option 'bmx6_mesh_prefix48' 'fd02:0:0'
option 'bmx6_ripe_prefix48' '2012:0:0' # suffix is autoconfigured based on community_node_id
option 'bmx6_ipv4_prefix24' '10.202'
# option 'bmx6_ipv4_address' '10.202.9.01/24' # if commented out then option is autoconfigured based on
# community_node_id and bmx6_ipv4_prefix
option 'bmx6_tablePrefTuns' '7000'
option 'bmx6_tableTuns' '70'
option 'bmx6_throwRules' '1'
option 'babel_mesh_prefix48' 'fd03:0:0'
option 'disable_lan_dhcp' '0'
option 'netserver' '1'
</pre>
h3. Tunnels (gateways)
Offer/Fetch networks in the Mesh
<pre>
config 'qmp' 'tunnels'
option 'search_ipv4_tunnel' '0.0.0.0/0'
option 'search_ipv6_tunnel' '::/0'
# option 'offer_ipv4_tunnel' '0.0.0.0/0'
# option 'offer_ipv6_tunnel' '::/0'
</pre>
h3. WiFi
Main wireless configuration (common for all wifi devices)
<pre>
config 'qmp' 'wireless'
option 'driver' 'mac80211'
option 'country' 'SP'
option 'bssid' '02:CA:FF:EE:BA:BE'
# First wifi device
config 'wireless'
option 'mode' 'adhoc'
option 'name' 'qMp.lab104'
option 'txpower' '14'
option 'channel' '140-'
option 'mac' '90:a4:de:c0:bb:c3'
option 'device' 'wlan0'
# Second wifi device
config 'wireless'
option 'mode' 'ap'
option 'name' 'qMp'
option 'txpower' '17'
option 'channel' '9+'
option 'mac' '00:80:48:78:75:23'
option 'device' 'wlan1'
</pre>