Actions
Config » Historial » Revisió 9
« Anterior |
Revisió 9/13
(diferencies)
| Següent »
Pau Escrich, 09-01-2013 17:43
Config¶
Network interfaces¶
config 'qmp' 'interfaces' # option 'configure_switch' 'eth0' # (uncomment line if available, e.g. WGT634U) option 'lan_devices' 'eth0 wlan1 dummy0' # LAN (dhcp server) option 'wan_devices' 'eth1' # WAN (dhcp client) option 'mesh_devices' 'wlan0 wlan2 eth0 eth1' # Mesh devices, will be extended by VLAN tag! option 'no_vlan_devices' '' # Network devices where we do not want to use VLAN tag (not recommended!)
Node information¶
config 'qmp' 'node' option 'primary_device' 'eth0' option 'community_id' 'qMp' option 'community_node_id' '' option 'key' '/tmp/qmp_key'
Upgrade firmware¶
config 'qmp' 'update' option 'url' 'http://fw.qmp.cat/testing' option 'images' 'IMAGES' option 'devices' 'DEVICES' option 'filter' 'sysupgrade' option 'preserve' '/etc/config/qmp /etc/shadow /etc/passwd /etc/rc.local /etc/firewall.user /etc/dropbear/* /etc/config/b6m-spread'
DHCP overlapping (Roaming)¶
This is for Roaming mode, each node assings a non-overlapping DHCP IPv4 ranges over a /16 network on LAN device
config 'qmp' 'non_overlapping' option 'ignore' '0' option 'dhcp_offset' '2' option 'qmp_leasetime' '1h'
Network (layer3)¶
config 'qmp' 'networks' option 'dns' '141.1.1.1 85.126.4.170 202.83.95.227' option 'lan_address' '172.30.22.1' option 'lan_netmask' '255.255.255.0' # means olsr6 use vlantag 10+1, bmx6 use vlantag 10+2 option 'mesh_protocol_vids' 'olsr6:1 bmx6:2' option 'mesh_vid_offset' '10' # rescue network prefix, the 16 missing bits are taken from device MAC option 'rescue_prefix24' '169.254' # OLSR (backup protocol) only supports IPv6 option 'olsr6_mesh_prefix48' 'fd01:0:0' option 'olsr6_ripe_prefix48' '2011:0:0' # BMX6 (main protocol) runs IPv6 backbone and IPv4 tunneled option 'bmx6_mesh_prefix48' 'fd02:0:0' option 'bmx6_ripe_prefix48' '2012:0:0' # suffix is autoconfigured based on community_node_id option 'bmx6_ipv4_prefix24' '10.202' # option 'bmx6_ipv4_address' '10.202.9.01/24' # if commented out then option is autoconfigured based on # community_node_id and bmx6_ipv4_prefix option 'bmx6_tablePrefTuns' '7000' option 'bmx6_tableTuns' '70' option 'bmx6_throwRules' '1' option 'babel_mesh_prefix48' 'fd03:0:0' option 'netserver' '1'
Tunnels (gateways)¶
Offer/Fetch networks in the Mesh
config 'qmp' 'tunnels' option 'search_ipv4_tunnel' '0.0.0.0/0' option 'search_ipv6_tunnel' '::/0' # option 'offer_ipv4_tunnel' '0.0.0.0/0' # option 'offer_ipv6_tunnel' '::/0'
WiFi¶
Main wireless configuration (common for all wifi devices)
config 'qmp' 'wireless' option 'driver' 'mac80211' option 'country' 'SP' option 'bssid' '02:CA:FF:EE:BA:BE' # First wifi device config 'wireless' option 'mode' 'adhoc' option 'name' 'qMp.lab104' option 'txpower' '14' option 'channel' '140-' option 'mac' '90:a4:de:c0:bb:c3' option 'device' 'wlan0' # Second wifi device config 'wireless' option 'mode' 'ap' option 'name' 'qMp' option 'txpower' '17' option 'channel' '9+' option 'mac' '00:80:48:78:75:23' option 'device' 'wlan1'
Actualitzat per Pau Escrich fa casi 12 anys · 9 revisions