qMp (Quick Mesh Project) - Packages

h1. Packages

There are repositories which contain compiled packages, both those part of the qMp project themselves, or related to it (e.g.: LibreMap).

The repositories can be found here: 

@http://downloads.qmp.cat/Releases/XXXX/YYYY/packages/@ (for qMp ≤ 3.2.1)

@http://downloads.qmp.cat/Releases/XXXX/packages/ZZZZ/@ (for qMp ≥ 4.0)

where "XXXX" is the name of the release (e.g.: "4.0"; check the releases list at http://downloads.qmp.cat/Releases/) and "YYYY" or "ZZZZ" correspond to the CPU/SoC architecture. For example:

* *ar71xx/generic* (Ubiquiti AirMax devices like the NanoStation M5, most TP-Link routers, etc.):

** YYYY = ar71xx (qMp ≤ 3.2.1)

** ZZZZ = mips_24kc (qMp ≥ 4.0)

* *ramips/mt7620* (ZBT APE522-II, Xiaomi MiWiFi mini, Nexx WT3020, etc.):

** YYYY = ramips (qMp ≤ 3.2.1)

** ZZZZ = mipsel_24kc (qMp ≥ 4.0)

* *x86/legacy* (Alix boards, etc.):

** YYYY = x86 (qMp ≤ 3.2.1)

** ZZZZ = i386_pentium (qMp ≥ 4.0)

* *x86/64* (APU boards, generic 64 bits x86 CPUs, etc.):

** YYYY = x86 (qMp ≤ 3.2.1)

** ZZZZ = x86_64 (qMp ≥ 4.0)

The repositories can be used with the "opkg" tool, by adding the corresponding line to @/etc/opkg/customfeeds.conf@. For instance:

@src/gz qmp http://downloads.qmp.cat/Releases/3.2.1/mpc85xx/packages/qmp_packages/@ (for qMp ≤ 3.2.1)

@src/gz qmp http://downloads.qmp.cat/Releases/4.0/packages/mips_24kc/qmp/@ (for qMp ≥ 4.0)

Then "opkg update && opkg install qmp-small-node" should be enough to install the whole system.