qMp (Quick Mesh Project) - Packages

h1. Wireless autoconf

h2. Technical information (for developers)

This is the wireless configuration for file: /etc/config/qmp

These are the default parameters sharing all wireless interfaces

<pre>

config 'qmp' 'wireless'

 	option 'driver' 'mac80211'

 	option 'country' 'UZ'

 	option 'bssid' '02:CA:FF:EE:BA:BE'

</pre>

driver can be `mac80211` for athXk, and `madwifi` for madwifi

And these are the config parameters for each wifi interface.

<pre>

 config 'wireless'

 	option 'channel' '44'

 	option 'mode' 'adhoc'

 	option 'name' 'qmp'

 	option 'mac' '00:80:48:6b:25:b5'

 config 'wireless'

 	option 'channel' '10'

 	option 'mode' 'ap'

 	option 'name' 'qmp.cat-AP'

 	option 'mac' '00:80:48:6b:25:b6'

</pre>

h3. qmp_wireless_config

To apply this configuration to device, you must execute this commands: 

<pre>

. /etc/qmp/qmp_wireless.sh

qmp_configure_wifi

</pre>

This function takes the parameters from UCI and using the templates from: /etc/qmp/templates creates the openwrt wireless config

Templates are named like that: wireless.mac80211.adhoc wireless.madwifi.ap

Separed by dots, second name is the driver to use and third one is the mode. 

These templates looks like this:

<pre>

config wifi-device #QMP_DEVICE

	option type     mac80211

	option macaddr	#QMP_MAC

	option channel  #QMP_CHANNEL

        option diversity 0 # 0:off, 1:on

        option txantenna 0 # 0:auto, 1:main, 2:aux

        option rxantenna 0 # 0:auto, 1:main, 2:aux

	option country	#QMP_COUNTRY

	option outdoor	1

#	option txpower  1 

config wifi-iface

	option device	#QMP_DEVICE

	option mode	adhoc

	option ssid	#QMP_SSID

	option bssid	#QMP_BSSID

	option encryption none

</pre>

As you can see, the special words starting witch #QMP will be replaced by UCI parameters. 

So you can play a little with templates. For example, there is a template named: `wireless.mac80211.adhoc-n`

But the function qmp_wireless_config requires a complete configuration from UCI. So there is another function to generate the UCI config.

h3. qmp_wireless_config_initial

To execute this function:

<pre>

. /etc/qmp/qmp_wireless.sh

qmp_configure_wifi_initial

</pre>

This generates de UCI qmp configuration, but not allways from zero. You can have some parameters configured and the function will configure the rest for you. 

For example, you can have a configuration like this:

<pre>

config 'wireless'

 	option 'channel' '132'

 	option 'mode' 'adhoc'

</pre>

And after execute qmp_configure_wifi_initial you will have the rest of needed parameters 

<pre>

config 'wireless'

 	option 'channel' '132'

 	option 'mode' 'adhoc'

        option 'name' 'qmp'

 	option 'mac' '00:80:48:6b:25:b5'

</pre>

So, if you want to use the first device for meshing and the second one for access point, you can build the openwrt image with this kind of configuration:

<pre>

config 'wireless'

 	option 'mode' 'adhoc'

config 'wireless'

 	option 'mode' 'ap'

</pre>

And after the first startup qmp_configure_wifi_initial will be executed putting the rest of parameters.

The default configuration is read from file: /etc/qmp/templates/wireless.default.config looks like that:

<pre>

driver mac80211

country UZ

bssid 02:CA:FF:EE:BA:BE

channel 44

mode adhoc

name qmp.cat

</pre>