Projecte

General

Perfil

Estadístiques
| Branca: | Etiqueta: | Revisió:
Nom Mida Revisió Edat Autor Comentari
  configs 614698c5 més de 8 anys Roger Pueyo Centelles Add sunxi architecture imagebuilder
  images 3e50186d més de 8 anys Roger Pueyo Centelles Add support for TL-WDR3500-v1 and TL-WA7510N de...
  scripts d418904d més de 10 anys Pau Escrich Fix extra packages script
.gitignore 41 Bytes 58ead7a8 aproximadament 9 anys Roger Pueyo Centelles Add files folder to .gitignore
Makefile 9.78 KB ecaa6290 aproximadament 9 anys Roger Pueyo Centelles Rename testing images as testing after 3.2 release
README 4.24 KB c03b0d57 més de 11 anys Pau Escrich Update README
nightlycompile.sh 2.5 KB 73e6edce aproximadament 9 anys Roger Pueyo Centelles Remove -ib (architecture imagebuilder) profiles...
targets.mk 15.3 KB 3e50186d més de 8 anys Roger Pueyo Centelles Add support for TL-WDR3500-v1 and TL-WA7510N de...

Últimes revisions

# Data Autor Comentari
3e50186d 22-06-2016 18:42 Roger Pueyo Centelles

Add support for TL-WDR3500-v1 and TL-WA7510N devices

06d66f77 27-05-2016 11:48 Roger Pueyo Centelles

Rename Xiaomi MiWiFi Mini target and file name according to OpenWrt's changes

d2ef7e5d 26-05-2016 19:22 Roger Pueyo Centelles

Merge branch 'testing' into kalimotxo

314d86c0 26-05-2016 19:22 Roger Pueyo Centelles

Fix imagebuilders output file names

843e0957 26-05-2016 19:20 Roger Pueyo Centelles

Fix image name for a few devices from testing merge

e0e084f7 26-05-2016 19:18 Roger Pueyo Centelles

Merge branch 'testing' into kalimotxo

614698c5 26-05-2016 19:18 Roger Pueyo Centelles

Add sunxi architecture imagebuilder

afb80a79 26-05-2016 19:07 Roger Pueyo Centelles

Merge branch 'testing' into kalimotxo

3ca27e71 26-05-2016 18:41 Roger Pueyo Centelles

Do not gzip Lamobo R1 SD card image

0b3f3d47 14-04-2016 23:16 Roger Pueyo Centelles

Change compiled binary firmware images filename. The prefix is no longer openwrt, but qmp.

This is a quick fix, the prefix should be obtained from the compilation variables (VERSION_DIST?).

Visualitza totes les revisions | Visualitzar revisions

README


=================================================================================
qMpfw SDK
=================================================================================

qMpfw is a tool for developers to create a development enviroment for qMp.
Basically it consists in one Makefile, so it is called using "make" command.

Read Only URL: http://qmp.cat/git/qmpfw.git
Developer URL: ssh://gitosis@qmp.cat:221/qmpfw.git

=================================================================================
Command options
=================================================================================

To compile a qMp image from scratch, you need to specify the target (next example with target=rspro):
This command will run all necessary commands to compile the image. After the compilation you can see the
OpenWRT code in directory: build/[target]

make T=rspro build

Also you can specify the number of parallel processes for compilation and the verbose level:

make V=99 J=2 T=rspro build

For work in developer mode (uses QMP readwrite repository instead readonly one)

make T=rspro DEV=1 build

---------------------------------------------------------------------------------
To see list of avaiable targets run:

make list_targets

---------------------------------------------------------------------------------
This will update the repositories on the target specified

make update T=rspro

---------------------------------------------------------------------------------
This will update all sources

make update_all

---------------------------------------------------------------------------------
To syncronize config files from configs/ dir to existing target

make T=rspro sync_config

---------------------------------------------------------------------------------
To run menuconfig (from openwrt):

make T=rspro menuconfig

After that, the new config file will be applied to destination target and also it will by copied inside build/configs directory

---------------------------------------------------------------------------------
To run kernel menuconfig (from openwrt), in this case config file will be not copied because it is not directly compatible with configs/target/kernel_config:

make T=rspro kernel_menuconfig

---------------------------------------------------------------------------------
To run the initial checkout:

make T=rspro checkout

---------------------------------------------------------------------------------
Copy images built before to output directory

make T=rspro post_build

---------------------------------------------------------------------------------
To clean specific target:

make T=rspro clean

---------------------------------------------------------------------------------
To clean all targets:

make clean

---------------------------------------------------------------------------------
To clean just qmp packages from a target

make T=rspro clean_qmp

---------------------------------------------------------------------------------
To configure some general parameters from qMp you can run:

make config

TODO: This feature is missing


=================================================================================
Directory structure
=================================================================================

There are several directories and files. This is the functionallity for each of them:

- Makefile: the main makefile

- targets.mk: file which contains all information related with targets. If you want to add a new supported device you must edit it

- build: here you will have all needed sources

- build/configs: if you do some change in config file using "menuconfig" option, the new config is placed here (and also in destination target)

- dl: download folder for OpenWRT packages

- configs: config files for each kind of hardware. These are the default ones provided by qmpfw

- images: output directory for compiled images, each of them has a different timestamp, so you can have as many as you want

- files: directories and files inside will be directly copied to the root of the system image

- scripts: special directory to execute arbitrari script before and/or after the compilation process, see scripts/README

També disponible a: Atom