Config » Historial » Revisió 4
Revisió 3 (Pau Escrich, 09-01-2013 17:31) → Revisió 4/13 (Pau Escrich, 09-01-2013 17:36)
h1. Config
<pre>
config 'qmp' 'interfaces'
# option 'configure_switch' 'eth0' # (uncomment line if available, e.g. WGT634U)
option 'lan_devices' 'eth0 wlan1 dummy0' # LAN (dhcp server) will be used as is!
option 'wan_devices' 'eth1' # WAN (dhcp client) will be used as is!
option 'mesh_devices' 'wlan0 wlan2 eth0 eth1' # Mesh devices, will be extended by VLAN vlan tag!
option 'no_vlan_devices' '' # Network devices where we do not want to use VLAN tag (not recommended!)
config 'qmp' 'node'
option 'primary_device' 'eth0'
option 'community_id' 'qMp'
option 'community_node_id' ''
option 'key' '/tmp/qmp_key'
config 'qmp' 'update'
option 'url' 'http://fw.qmp.cat/testing'
option 'images' 'IMAGES'
option 'devices' 'DEVICES'
option 'filter' 'sysupgrade'
option 'preserve' '/etc/config/qmp /etc/shadow /etc/passwd /etc/rc.local /etc/firewall.user /etc/dropbear/* /etc/config/b6m-spread'
config 'qmp' 'non_overlapping'
option 'ignore' '0' # This is for Roaming mode
# Each node assings a non-overlapping DHCP IPv4 ranges over a /16 network on LAN lan device
config 'qmp' 'non_overlapping'
option 'ignore' '0'
option 'dhcp_offset' '2'
option 'qmp_leasetime' '1h'
config 'qmp' 'networks'
option 'dns' '141.1.1.1 85.126.4.170 202.83.95.227'
option 'lan_address' '172.30.22.1'
option 'lan_netmask' '255.255.255.0'
#option 'publish_lan' '0'
option 'mesh_protocol_vids' 'olsr6:1 bmx6:2' # means olsr6 use vlantag 10+1, bmx6 use vlantag 10+2
option 'mesh_protocol_vids' 'olsr6:1 bmx6:2'
option 'mesh_vid_offset' '10'
option 'rescue_prefix24' '169.254' # rescue network prefix, the 16 missing bits are taken from device MAC
option 'rescue_prefix24' '169.254'
# OLSR (backup protocol) only supports IPv6
option 'olsr6_mesh_prefix48' 'fd01:0:0'
option 'olsr6_ripe_prefix48' '2011:0:0'
option 'olsr6_ipv4_prefix24' '10.201'
# option 'olsr6_ipv4_address' '10.201.9.01'
# option 'olsr6_ipv4_netmask' '255.255.255.0'
# option 'olsr6_6to4_netmask' '120'
# BMX6 (main protocol) runs IPv6 backbone and IPv4 tunneled
option 'bmx6_mesh_prefix48' 'fd02:0:0'
option 'bmx6_ripe_prefix48' '2012:0:0' # suffix is autoconfigured based on community_node_id
option 'bmx6_ipv4_prefix24' '10.202'
# option 'bmx6_ipv4_address' '10.202.9.01/24' # if commented out then option is autoconfigured based on
# community_node_id and bmx6_ipv4_prefix
option 'bmx6_tablePrefTuns' '7000'
option 'bmx6_tableTuns' '70'
option 'bmx6_throwRules' '1'
option 'babel_mesh_prefix48' 'fd03:0:0'
option 'netserver' '1'
config 'qmp' 'tunnels'
option 'search_ipv4_tunnel' '0.0.0.0/0'
option 'search_ipv6_tunnel' '::/0'
# option 'offer_ipv4_tunnel' '0.0.0.0/0'
# option 'offer_ipv6_tunnel' '::/0'
config 'qmp' 'wireless'
option 'driver' 'mac80211'
option 'country' 'SP'
option 'bssid' '02:CA:FF:EE:BA:BE'
config 'qmp' 'interfaces'
# option 'configure_switch' 'eth0' # (uncomment line if available, e.g. WGT634U)
option 'lan_devices' 'eth0 wlan1 dummy0' # will be used as is!
option 'wan_devices' 'eth1' # will be used as is!
option 'mesh_devices' 'wlan0 wlan2 eth0 eth1' # will be extended by vlan tag!
config 'qmp' 'node'
option 'primary_device' 'eth0'
option 'community_id' 'qMp'
option 'community_node_id' ''
option 'key' '/tmp/qmp_key'
config 'qmp' 'update'
option 'url' 'http://fw.qmp.cat/testing'
option 'images' 'IMAGES'
option 'devices' 'DEVICES'
option 'filter' 'sysupgrade'
option 'preserve' '/etc/config/qmp /etc/shadow /etc/passwd /etc/rc.local /etc/firewall.user /etc/dropbear/* /etc/config/b6m-spread'
config 'qmp' 'non_overlapping'
option 'ignore' '0' # Each node assings a non-overlapping DHCP IPv4 ranges over a /16 network on lan device
option 'dhcp_offset' '2'
option 'qmp_leasetime' '1h'
config 'qmp' 'networks'
option 'dns' '141.1.1.1 85.126.4.170 202.83.95.227'
option 'lan_address' '172.30.22.1'
option 'lan_netmask' '255.255.255.0'
#option 'publish_lan' '0'
#option 'niit_prefix96' '0:0:0:0:0:ffff' # omit trailing 32 ipv4 bits !
option 'mesh_protocol_vids' 'olsr6:1 bmx6:2' # means olsr6 use vlantag 10+1, bmx6 use vlantag 10+2
option 'mesh_vid_offset' '10'
option 'rescue_prefix24' '169.254' # rescue network prefix, the 16 missing bits are taken from device MAC
option 'olsr6_mesh_prefix48' 'fd01:0:0'
option 'olsr6_ripe_prefix48' '2011:0:0'
option 'olsr6_ipv4_prefix24' '10.201'
# option 'olsr6_ipv4_address' '10.201.9.01'
# option 'olsr6_ipv4_netmask' '255.255.255.0'
# option 'olsr6_6to4_netmask' '120'
option 'bmx6_mesh_prefix48' 'fd02:0:0'
option 'bmx6_ripe_prefix48' '2012:0:0' # suffix is autoconfigured based on community_node_id
option 'bmx6_ipv4_prefix24' '10.202'
# option 'bmx6_ipv4_address' '10.202.9.01/24' # if commented out then option is autoconfigured based on
# community_node_id and bmx6_ipv4_prefix
option 'bmx6_tablePrefTuns' '7000'
option 'bmx6_tableTuns' '70'
option 'bmx6_throwRules' '1'
option 'babel_mesh_prefix48' 'fd03:0:0'
option 'netserver' '1'
config 'qmp' 'tunnels'
option 'search_ipv4_tunnel' '0.0.0.0/0'
option 'search_ipv6_tunnel' '::/0'
# option 'offer_ipv4_tunnel' '0.0.0.0/0'
# option 'offer_ipv6_tunnel' '::/0'
config 'qmp' 'wireless'
option 'driver' 'mac80211'
option 'country' 'SP'
option 'bssid' '02:CA:FF:EE:BA:BE'
config 'qmp' 'interfaces'
# option 'configure_switch' 'eth0' # (uncomment line if available, e.g. WGT634U)
option 'lan_devices' 'eth0 wlan1 dummy0' # will be used as is!
option 'wan_devices' 'eth1' # will be used as is!
option 'mesh_devices' 'wlan0 wlan2 eth0 eth1' # will be extended by vlan tag!
config 'qmp' 'node'
option 'primary_device' 'eth0'
option 'community_id' 'qMp'
option 'community_node_id' ''
option 'key' '/tmp/qmp_key'
config 'qmp' 'update'
option 'url' 'http://fw.qmp.cat/testing'
option 'images' 'IMAGES'
option 'devices' 'DEVICES'
option 'filter' 'sysupgrade'
option 'preserve' '/etc/config/qmp /etc/shadow /etc/passwd /etc/rc.local /etc/firewall.user /etc/dropbear/* /etc/config/b6m-spread'
config 'qmp' 'non_overlapping'
option 'ignore' '0' # Each node assings a non-overlapping DHCP IPv4 ranges over a /16 network on lan device
option 'dhcp_offset' '2'
option 'qmp_leasetime' '1h'
config 'qmp' 'networks'
option 'dns' '141.1.1.1 85.126.4.170 202.83.95.227'
option 'lan_address' '172.30.22.1'
option 'lan_netmask' '255.255.255.0'
#option 'publish_lan' '0'
#option 'niit_prefix96' '0:0:0:0:0:ffff' # omit trailing 32 ipv4 bits !
option 'mesh_protocol_vids' 'olsr6:1 bmx6:2' # means olsr6 use vlantag 10+1, bmx6 use vlantag 10+2
option 'mesh_vid_offset' '10'
option 'rescue_prefix24' '169.254' # rescue network prefix, the 16 missing bits are taken from device MAC
option 'olsr6_mesh_prefix48' 'fd01:0:0'
option 'olsr6_ripe_prefix48' '2011:0:0'
option 'olsr6_ipv4_prefix24' '10.201'
# option 'olsr6_ipv4_address' '10.201.9.01'
# option 'olsr6_ipv4_netmask' '255.255.255.0'
# option 'olsr6_6to4_netmask' '120'
option 'bmx6_mesh_prefix48' 'fd02:0:0'
option 'bmx6_ripe_prefix48' '2012:0:0' # suffix is autoconfigured based on community_node_id
option 'bmx6_ipv4_prefix24' '10.202'
# option 'bmx6_ipv4_address' '10.202.9.01/24' # if commented out then option is autoconfigured based on
# community_node_id and bmx6_ipv4_prefix
option 'bmx6_tablePrefTuns' '7000'
option 'bmx6_tableTuns' '70'
option 'bmx6_throwRules' '1'
option 'babel_mesh_prefix48' 'fd03:0:0'
option 'netserver' '1'
# Offer/Fetch networks in the Mesh
config 'qmp' 'tunnels'
option 'search_ipv4_tunnel' '0.0.0.0/0'
option 'search_ipv6_tunnel' '::/0'
# option 'offer_ipv4_tunnel' '0.0.0.0/0'
# option 'offer_ipv6_tunnel' '::/0'
# Main wireless configuration (common for all wifi devices)
config 'qmp' 'wireless'
option 'driver' 'mac80211'
option 'country' 'SP'
option 'bssid' '02:CA:FF:EE:BA:BE'
# First wifi device
config 'wireless'
option 'mode' 'adhoc'
option 'name' 'qMp.lab104'
option 'txpower' '14'
option 'channel' '140-'
option 'mac' '90:a4:de:c0:bb:c3'
option 'device' 'wlan0'
# Second wifi device
config 'wireless'
option 'mode' 'ap'
option 'name' 'qMp'
option 'txpower' '17'
option 'channel' '9+'
option 'mac' '00:80:48:78:75:23'
option 'device' 'wlan1'
</pre>