Projecte

General

Perfil

Start » Historial » Versió 9

Pau Escrich, 23-01-2012 11:12

1 9 Pau Escrich
!http://qmp.cat/images/qmp_small.png!
2 1 Pau Escrich
3
4
h2. What is qMp?
5
6
* It is firmware for embedded network devices based on OpenWRT GNU/linux operating system
7
* It provides an easy way to set up networks using MESH it doesn't matter your they are either wired or WiFi or a mix of both
8
* It is a fast and reliable way to extend an Internet uplink to end-users
9
10
h2. Why?
11
12
Two main purposes:
13
14 6 Pau Escrich
* *For quick deployments*
15
There's no need to think about network topology, all you need to do is to spread the nodes and connect one to internet.
16
Use it in any kind of environments like concerts, meetings, demonstrations or in case of a natural disaster.
17 1 Pau Escrich
18 6 Pau Escrich
* *For the wireless communities*
19
If you are new into this all you need to become part of the existing community or to start building one is to download and install the firmware. It won't take you more than the time you need to take a coffee to have your node ready to be put in place.
20
But if you are already an old hands at wireless communities here is qMp to let you forget about all those weird network administration tricks that don't last more than a day in your mind and focus on what makes your community grow, that is, the nodes deployment.
21 1 Pau Escrich
22
h2. How?
23
24
* Providing a complete autoconfiguration system from the first boot
25
* Using a set of Layer 3 MESH protocols: BMX6 (main), OLSR6 and Babel as backup
26
* Using IPv6 as the main IP protocol
27
* Using IPv4 only for end-user connection (tunneling)
28
* Providing an easy and intuitive administration web interface (LuCI based)
29
30 5 Pau Escrich
h2. Devices?
31 1 Pau Escrich
32 6 Pau Escrich
Currently the official supported devices are: Alix, Routerstation, RouterstationPro, NanoStation/Nanobridge/Airgrid M5/M2
33
But qMp is Free software, so if it doesn't perfectly suits for you all you need to do is to modify it and send us your patches to let us apply them.
34 1 Pau Escrich
35
h2. Features
36 6 Pau Escrich
37
# *autoconf:* A system to auto-configure all settings. So the user does not need to configure anything.
38
# *qmpinfo:* It is a tool written in Lua to get some information about the QMP system.
39
# *qmpcontrol:* It is a tool written as a shell script to manage the QMP system.
40
# *qMp webint:* A LUCI (web interface) module to manage and monitor QMP system.
41
# *map:* A map tool (named b6m and written in Shell Scripting using OpenStreetMaps) to see the position of all network nodes and how are they connected.
42
# *internet detect:* A tool (named gwck) written in Shell Script which is monitoring if the node is connected to internet, in this case it modifies all needed things to share it with the whole network.
43 1 Pau Escrich
44 7 Pau Escrich
h2. Get the firmware
45
46
Get the code using wget
47
 @wget -c -q -O - "http://qmp.cat/gitrevision_download?project_id=7&rev=anonymous" | tar zxvf -@
48
49
Or get the code using git
50
 @git clone git://qmp.cat/qmpfw.git qmpfw@
51
52
Then enter to diectory
53
 @cd qmpfw@
54
55
And compile it
56
 @make T=alix build@
57
58
You can find available targets executing
59
 @make list_targets@
60
61
After that, you will find the images ready to install in your devices inside directory images/
62
63 1 Pau Escrich
h2. Contributions
64
65 8 Pau Escrich
The main part of this project has been freely contributed by a bunch of wireless enthusiast, but in the year 2011 it has been partially funded by Funació PuntCat.