qMp (Quick Mesh Project) - Packages

The configuration of switch that should look like this [1], with a fresh instalation of testing branch image the hooks scripts set the node with this configuration (that doesn't allow to connect in Mesh at anyport):

~# cat /etc/config/network

config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config switch
option name 'eth0'
option reset '1'
option enable_vlan '1'

config switch_vlan
option device 'eth0'
option vlan '1'
option ports '0t 2 3 4 5'

config switch_vlan
option device 'eth0'
option vlan '2'
option ports '0t 1'

config interface 'wan_e0_2'
option ifname 'eth0.2'
option proto 'dhcp'
option metric '2048'

config interface 'lan'
option type 'bridge'
option auto '1'
option proto 'static'
option ipaddr '172.30.22.1'
option netmask '255.255.0.0'
option dns '141.1.1.1 85.126.4.170 202.83.95.227'
list ifname 'eth0.1'
option ip6addr 'fd00:1714:1714:6aa2::1/64'

config interface 'mesh_w0_11'
option ifname '@mesh_w0.11'
option proto 'static'
option ip6addr 'FD01:0:0:6470:267:6AA2:0:11/128'

config interface 'mesh_w0_12'
option ifname '@mesh_w0.12'
option proto 'static'
option ip6addr 'FD02:0:0:6470:267:6AA2:0:12/128'

config interface 'mesh_w0'
option proto 'static'
option ipaddr '169.254.164.1'
option netmask '255.255.255.248'

config interface 'mesh_e0_12_11'
option ifname '@mesh_e0_12.11'
option proto 'static'
option ip6addr 'FD01:0:0:6470:267:6AA2:0:21/128'

config interface 'mesh_e0_12'
option proto 'static'
option ipaddr '169.254.255.1'
option netmask '255.255.255.248'
option ifname 'eth0.12'

[1] http://qmp.cat/projects/qmp/wiki/WDR3600_WDR4300