Project

General

Profile

Error #466

Devices with a switch on eth0 and eth0.1 eth0.2 interfaces on top of it are not properly autoconfigured

Added by Roger Pueyo Centelles about 1 year ago. Updated about 1 year ago.

Status:
Tancat
Priority:
Alta
Category:
qMp
Target version:
Start date:
10/03/2018
Due date:
% Done:

100%

Estimated time:
4.00 h
Spent time:

Description

The autoconfiguration process uses eth0 instead of eth0.1 and eth0.2, which are ignored.

On a WT-1520, WL-WN575A3, etc.

Associated revisions

Revision d3aecebc (diff)
Added by Roger Pueyo Centelles about 1 year ago

[qmp-system] Reload network after restarting it

Commit 630bd7a8 fixed #464 but introduced a new bug in devices
with a switched Ethernet interface, where the VLAN interfaces would not
come up on time after restarting the network during the
autoconfiguration process.

Just reloading the network instantly applies the changes for wired
interfaces, but restarting it is needed to ensure wifi interfaces work
correctly. Restarting and then reloading ensures the network is up and
running before continuing the autoconfiguration process, therefore no
devices missdetection should occur.

Fixes #466

Signed-off-by: Roger Pueyo Centelles <>

History

#1 Updated by Roger Pueyo Centelles about 1 year ago

Commit 630bd7a8bd62e6675f6c9681804dcebb92f2ea23, for fixing issue #464, introduced it. "/etc/init.d/network restart" exits while the whole network is still being set up and turn on.

#2 Updated by Roger Pueyo Centelles about 1 year ago

  • Status changed from Nou to Resolt
  • % Done changed from 0 to 100

Reload the network after restarting it (see commit 630bd7a8bd62e6675f6c9681804dcebb92f2ea23)

#3 Updated by Roger Pueyo Centelles about 1 year ago

  • Status changed from Resolt to Tancat

Also available in: Atom PDF