Projecte

General

Perfil

Temps invertit

Filtres

Aplicar Netejar

Hores: 1677:45

Data Usuari Activitat Assumpte Comentari Hores
07-08-2015 Roger Pueyo Centelles Desenvolupament Error #344: [Kalimotxo] WRTNode network settings Fixed 2:00 Actions
27-02-2015 Roger Pueyo Centelles Desenvolupament Característica #349: [Clearance 3.1] Backporting iperf3 Backported in NC's feed 2:00 Actions
07-08-2015 Roger Pueyo Centelles Desenvolupament Error #356: [Kalimotxo] libremap-agent crashes (missing luci.fs) Patch accepted 4:00 Actions
05-07-2015 Roger Pueyo Centelles Desenvolupament Error #361: TL WR-842ND-v2: The default flash has wan and lan swapped. Device hook created 1:00 Actions
08-07-2015 Roger Pueyo Centelles Desenvolupament Error #372: [Clearance 3.2-rc2] No BMX6 frames in Ethernet interface for Ubiquiti's Nanobeam 1:00 Actions
07-08-2015 Roger Pueyo Centelles Desenvolupament Error #377: Network configuration is not really applied after "Saving and applying" settings and a manual reboot is needed to have it working Seems to be working 8:00 Actions
04-08-2015 Roger Pueyo Centelles Desenvolupament Error #377: Network configuration is not really applied after "Saving and applying" settings and a manual reboot is needed to have it working Backported QinQ 8:00 Actions
18-03-2017 Roger Pueyo Centelles Desenvolupament Error #393: Asymetric BMX6 link on ethernet bridge interface Interface roles assignation has been reworked 8:00 Actions
16-09-2018 Roger Pueyo Centelles Desenvolupament Característica #394: Proper detection and autoconfiguration of wireless interfaces Should already work quite well 8:00 Actions
04-04-2017 Roger Pueyo Centelles Desenvolupament Error #414: Wired network interfaces not shown on the web GUI for devices without switch (i.e. eth0), while switched ones do (e.g. eth0.2) Fixed 2:00 Actions
24-04-2021 Roger Pueyo Centelles Desenvolupament Error #423: Devices with a single Ethernet interface and a swith driving different ports (e.g. eth0=> eth0.1+eth0.2) are not properly managed if the switch is on eth1 instead of eth0 (case of TL-WR841N-v8) Fixed 10:00 Actions
07-02-2019 Roger Pueyo Centelles Desenvolupament Error #423: Devices with a single Ethernet interface and a swith driving different ports (e.g. eth0=> eth0.1+eth0.2) are not properly managed if the switch is on eth1 instead of eth0 (case of TL-WR841N-v8) Use the device's own info to properly decide how to manage interfaces. 1:00 Actions
25-10-2017 Roger Pueyo Centelles Desenvolupament Característica #427: "Use mesh in all wired devices" (meshall) option in east setup is not saved anywhere in qMp config Removed option 1:00 Actions
25-10-2017 Roger Pueyo Centelles Desenvolupament Error #429: A wireless device configured as "ignored" by qMp can not be reconfigured again Won't fix 2:00 Actions
23-10-2017 Roger Pueyo Centelles Desenvolupament Error #429: A wireless device configured as "ignored" by qMp can not be reconfigured again Interfaces can be reconfigured in wireless section, in two steps 2:00 Actions
25-10-2017 Roger Pueyo Centelles Desenvolupament Error #430: Reconfigure buttons in "Wireless settings" do not really work as expected Removed duplicate button and fixed submit actions 2:00 Actions
16-01-2018 Roger Pueyo Centelles Desenvolupament Suport #441: root password overwritten on first boot (or after flashing) Check file /qmp_configured 0:12 Actions
25-01-2018 Roger Pueyo Centelles Desenvolupament Error #443: Can't IPv4 ping between nodes in qMp 4.0 Macondo Depends on BMX6 version 1:00 Actions
25-01-2018 Roger Pueyo Centelles Desenvolupament Error #443: Can't IPv4 ping between nodes in qMp 4.0 Macondo Depends on BMX6 version 1:00 Actions
06-02-2019 Roger Pueyo Centelles Desenvolupament Error #446: [qmp-users] BMX6 Graph issue in Macondo Fixed upstream 7:00 Actions
19-07-2018 Roger Pueyo Centelles Desenvolupament Error #446: [qmp-users] BMX6 Graph issue in Macondo Also depends on BMX6 bug 2:00 Actions
28-08-2018 Roger Pueyo Centelles Desenvolupament Error #450: [qmp-ncgui] nodes[indexNode(nodeId)].system.board.release.codename does not exist anymore 1:00 Actions
28-08-2018 Roger Pueyo Centelles Desenvolupament Característica #457: [nc-gui] All the "debug" options are shown in the menu 4:00 Actions
17-09-2018 Roger Pueyo Centelles Desenvolupament Error #460: qMp autoconfiguration script does not autoconfigure the wireless interfaces Not reproducible (II) 1:00 Actions
17-09-2018 Roger Pueyo Centelles Desenvolupament Error #460: qMp autoconfiguration script does not autoconfigure the wireless interfaces Not reproducible 1:00 Actions
20-02-2020 Roger Pueyo Centelles Desenvolupament Característica #461: Allow choosing wireless country Added 2:00 Actions
25-09-2018 Roger Pueyo Centelles Desenvolupament Error #463: When dual wifi mode (e.g.: 802.11s + adhoc) is used, wlan0 and wlan0a are shown in Easy Setup Fixed 3:00 Actions
03-10-2018 Roger Pueyo Centelles Desenvolupament Error #466: Devices with a switch on eth0 and eth0.1 eth0.2 interfaces on top of it are not properly autoconfigured Fixed 3:00 Actions
08-12-2018 Roger Pueyo Centelles Desenvolupament Característica #470: Check WiFi status when using 802.11s on DFS-enforced channels Script ready 4:00 Actions
21-02-2020 Roger Pueyo Centelles Desenvolupament Error #474: Custom community names are not included into the hostname 4:00 Actions
21-02-2020 Roger Pueyo Centelles Desenvolupament Error #474: Custom community names are not included into the hostname Decisions 1:00 Actions
11-12-2019 Roger Pueyo Centelles Desenvolupament Error #475: /usr/lib/lua/luci/dispatcher.lua:756: module 'luci.cbi' not found: Fixed with package luci-compat 1:00 Actions
07-07-2020 Roger Pueyo Centelles Desenvolupament Error #481: LAN bridge consistently gets 169.254.185.1 address during qmp_autoconf ubus reports it better and on time 2:00 Actions
04-07-2020 Roger Pueyo Centelles Desenvolupament Error #481: LAN bridge consistently gets 169.254.185.1 address during qmp_autoconf Caused by the 2.4 GHz radio being in adhoc/11s mesh and AP? 1:00 Actions
04-07-2020 Roger Pueyo Centelles Desenvolupament Característica #482: primary_device on devices with DSA networking Still eth0 is there, though 1:00 Actions
01-12-2020 Roger Pueyo Centelles Desenvolupament Error #484: Switched Ethernet devices with all ports in one VLAN are not correctly handled during autoconfiguration Race condition 4:00 Actions
16-05-2019 Roger Pueyo Centelles Maintenance Suport #98: Instruccions per desactivar el portal captiu. Device configuration => qMp services => Deseleccionar "Captive portal" 1:00 Actions
03-10-2018 Roger Pueyo Centelles Maintenance Característica #213: QOS - Quality of Service for BW control Use sqm qos packages 1:00 Actions
07-02-2019 Roger Pueyo Centelles Maintenance Error #218: Remove IPv4 options from OLSR config OLSR removed 1:00 Actions
03-10-2018 Roger Pueyo Centelles Maintenance Error #265: TPlink WDR3600/4300 hooks sets the switch configuration without support to connect in mesh Does not apply anymore 1:00 Actions
21-02-2014 Simó Albert i Beltran Maintenance Error #277: Wrong URL in redmine notification emails. Fix and test the solution. 0:15 Actions
03-04-2014 Roger Pueyo Centelles Maintenance Característica #281: Setting hwmode to "auto" in /etc/config/wireless for 802.11(b)gn devices makes them work only at 802.11g's 54 Mb/s Solved with Pau 1:00 Actions
16-05-2019 Roger Pueyo Centelles Maintenance Error #286: LuCI Node Configuration updates rewrite Mesh Configuration to default settings Not anymore 0:00 Actions
16-05-2019 Roger Pueyo Centelles Maintenance Error #290: Mini SNMPd config reset on system upgrade Not anymore 0:00 Actions
13-06-2014 Roger Pueyo Centelles Maintenance Error #292: Wireless card is configured with SHORT-GI-20 despite not supporting it Fixed but further work is needed 2:00 Actions
10-11-2014 Roger Pueyo Centelles Maintenance Característica #297: No Auto Refresh option in Mesh / Links This bug does not belong to qMp 0:15 Actions
07-08-2015 Roger Pueyo Centelles Maintenance Error #301: [Kalimotxo] No DHCP in LAN Not failing anymore 1:00 Actions
07-08-2015 Roger Pueyo Centelles Maintenance Error #305: [Clearance] iw list shows wrong power values Not a qMp issue 1:00 Actions
31-10-2014 Roger Pueyo Centelles Maintenance Error #306: qmpcontrol upgrade of NS2 goes to NS5 This is a limitation of OpenWrt 0:15 Actions
07-08-2015 Roger Pueyo Centelles Maintenance Error #308: [Kalimotxo] No traceroute in Tools -> Network testing Already in qmp-small-node 1:00 Actions
(151-200/304) Per pàgina: 25, 50, 100

També disponible a: Atom CSV